Skip to Content

< Previous

ZAK 2 updated

Average Rating = 3.50/5 Average Rating : 3.50 out of 5
Item Details | Reviews (2)
ZAK 2
ZAK 2
Adrenalin   (4026 Hits)

Description

The ZAK 2 is suitable to any kind of jumping whether it be for regular, wingsuit or radical freestyle jumps. The owner of a Zak 2 can rest assured that his rig is safe, of fine quality and will last for many years.

Added: 2009-02-25 | Last Modified: 2011-02-02 | Views: 4026 | Item ID: 41


User Reviews:

Average Rating: Average Rating
Total Reviews: 2

GoWrite your own Review

100% Times: 0 Times: 1 Times: 0 Times: 0 Times: 1
80%
60%
40%
20%
0%
Times  0 1 0 0 1
Rating  1 2 3 4 5

Zak2 container

5 out of 5 stars ZAK 2 Rated 5 by: e.a.hernandez on 2017-03-15

I have owned a Zak1, Zak2 and now have a Zak3. The Zak2 is great! The rig is durable yet not overbuilt which avoid it from being too heavy. It contours nicely to the body and fits very comfortable. Rig is very well priced; stainless steel is standard on all their rigs.


Zak2 Container

2 out of 5 stars ZAK 2 Rated 2 by: DanielRjumps on 2016-09-07

I have ~220 jumps on my Zak2 and am finally replacing it with a better container to solve my issues with it.

The top flap doesn't have a stiffener at the grommet, so it pulls a crease down the middle which then pulls the sides of the flaps inward. Because the side flaps don't overlap on the shoulders, when the top flap gets pulled inward, it can expose some canopy on each side. Packing extra neat with clamps can help but even then I've still had that happen when I put the rig on.

The bridle protection also sucks. with the design of the bottomless corners and the bottom flap, there's hardly any overlap between the bottom and side flaps to store the bridle and even with the bottom pin as tight as possible with extra fabric in the bottom, I've still run into issues with not enough tension between the flaps and having that small section of bridle become exposed on wingsuit jumps.

When flying fast and steep, sometimes the top of the pin flap will catch air and almost pop open. Additionally, the tuck tabs for the riser covers nearly ripped off (hanging by a few stitches) ~100 jumps in. This was because then never hotknifed the edge before sewing it on, so the threads unraveled over use.

All in all, this is an OK rig if you mainly jump slider down, and some terminal. There's a lot of room for improvement, although I heard they fixed a lot of it in the Zak3.



Your ZAK 2 review:

> Modify your Review if you've already written one!

Write a Review