Forums: BASE Jumping: General BASE:
Consolidated Rigging
Premier Sponsor:

 


thirtypack

Nov 30, 2019, 1:53 PM
Post #1 of 11 (721 views)
Shortcut
Consolidated Rigging Can't Post

Can anyone tell me if Consolidated Rigging is on vacation or if they are still open? I've tried to contact them multiple ways for two weeks and can't get a response. Thanks in advance.

hjumper33
Moderator
Nov 30, 2019, 7:52 PM
Post #2 of 11 (693 views)
Shortcut
Re: [thirtypack] Consolidated Rigging [In reply to] Can't Post

I’m not sure how much they actively do in base as PD has been producing their canopies for a while, and I don’t imagine there are many new aces or blackjacks getting produced these days. What are you looking for help with?

bluhdow

Dec 1, 2019, 8:46 AM
Post #3 of 11 (647 views)
Shortcut
Re: [thirtypack] Consolidated Rigging [In reply to] Can't Post

They are around, it's just really slow. We've ordered a couple of items from them recently (line kits, lower control lines) that have taken a very long time for delivery. (Over one month is all I can confirm from memory.)

thirtypack

Dec 2, 2019, 9:57 AM
Post #4 of 11 (575 views)
Shortcut
Re: [hjumper33] Consolidated Rigging [In reply to] Can't Post

I'm needing lower control line for my Black Jack 310.

TomAiello

Dec 2, 2019, 1:08 PM
Post #5 of 11 (548 views)
Shortcut
Re: [hjumper33] Consolidated Rigging [In reply to] Can't Post

We've gotten some things from them pretty recently, including new canopies.

I'm not sure what the status of their business communications and hours are during the holiday season, though.

TomAiello

Dec 4, 2019, 9:00 AM
Post #6 of 11 (427 views)
Shortcut
Re: [thirtypack] Consolidated Rigging [In reply to] Can't Post

thirtypack wrote:
I'm needing lower control line for my Black Jack 310.

It takes about ten minutes to build lowers. Any competent rigger should be able to do it, just copying your existing lower.

If you're ever in Twin Falls, I can show you how to do it for your canopy, if you'd like, and you can use our equipment to build some new lowers for yourself.


(This post was edited by TomAiello on Dec 4, 2019, 9:00 AM)

BodeyM

Dec 4, 2019, 1:11 PM
Post #7 of 11 (384 views)
Shortcut
Re: [TomAiello] Consolidated Rigging [In reply to] Can't Post

If you're copying off the existing lowers, do you need account for stretch in the dacron?

hjumper33
Moderator
Dec 4, 2019, 3:08 PM
Post #8 of 11 (365 views)
Shortcut
Re: [BodeyM] Consolidated Rigging [In reply to] Can't Post

Tom I’m just curious, is the contact Adam or through PD?

As for copying old lowers, both the brake settings and the toggle position are infinitely changeable, so much less risk than a load bearing line.

TomAiello

Dec 4, 2019, 3:20 PM
Post #9 of 11 (361 views)
Shortcut
Re: [BodeyM] Consolidated Rigging [In reply to] Can't Post

Yes.

But it's actually not that important if you are using the (fairly shallow) factory brake settings, anyway. Just don't make them any deeper than the factory (and they'll get shallower with stretch). Toggles on the factory lowers are user-configured (backstop knot, no sewn loop from the factory), so you're going to be establishing that on test jumps anyway.

Plus, if you build your own, you can use the Simon Perriard's (newer) loop style brake settings, so you won't need to replace them again (probably ever).

TomAiello

Dec 4, 2019, 4:46 PM
Post #10 of 11 (348 views)
Shortcut
Re: [hjumper33] Consolidated Rigging [In reply to] Can't Post

hjumper33 wrote:
Tom I’m just curious, is the contact Adam or through PD?

As for copying old lowers, both the brake settings and the toggle position are infinitely changeable, so much less risk than a load bearing line.

Nancy, actually. Support@crmojo.com.

thirtypack

Dec 4, 2019, 7:20 PM
Post #11 of 11 (331 views)
Shortcut
Re: [TomAiello] Consolidated Rigging [In reply to] Can't Post

Thanks Tom. I contacted PD and they are taking care of it for me.


Forums : BASE Jumping : General BASE

 


Search for (options)

Log In:

Username:
Password: Remember me:

Go Register
Go Lost Password?

D4DR Media